turn. Insert the terminal block cover into the rear panel of the dryer. That's why the cords are sold separately. Therefore, the dryer's neutral was tied to the ground connection on the metal case of the dryer. Close the cold water tap. Connect the other wires to the outer terminal block screws. Note: It's still legal to use a dryer with a 3-prong cord and an older-style receptacle. A 4-wire system connection is required for new or remodeled construction, mobile homes, or if local codes do not permit grounding through neutral. Before the change, dryers used 3-prong cords that plugged into 3-slot electrical outlets (receptacles). An additional fitting is required to connect the 3/4 (1.9 cm) female thread end of a flexible connector to the 3/8 (1 cm) male pc hookup threaded end on the dryer. Allowing your dryer to operate on a heat setting will purge the line.
To confirm gas ignition, check the exhaust for heat. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. The good news is that the NEC (and most local building codes) permits the use of 3-prong cords in houses that have the old style of dryer outlet. National Electrical Code (NEC) changed the requirements for electric dryer wiring and cord connections. Electric clothes dryers typically are sold without power cords attached, and as annoying as it may be, there's a good reason for this omission. Connect the neutral wire (white or center wire) and ground wire (white) to the center screw of the terminal block.
Installing the Dryer (DV50K7500) - Samsung
Dryer hookup wires, Sugar mummy hookup in nigeria,